Ridgid OL50145MWD Operation Manual - Page 5
Symbols - manual air compressor
View all Ridgid OL50145MWD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) Alternating Current Type of current Class II Construction Double-insulated construction Wet Conditions Alert Read The Operator's Manual Eye Protection Safety Alert Risk of Bursting Risk of Fire or Explosion Do not expose to rain or use in damp locations. To reduce the risk of injury, user must read and understand operator's manual before using this product. Always wear safety goggles or safety glasses with side shields and, as necessary, a full face shield when operating this product. Precautions that involve your safety. Do not adjust regulator to result in output pressure greater than marked maximum pressure of attachment. Do not use at pressure greater than 145 PSI. Do not spray flammable liquid in a confined area. Spray area must be well ventilated. Do not smoke while spraying or spray where spark or flame is present. Keep compressors as far from the spraying area as possible, at least 15 feet from the spraying area and all explosive vapors. Risk of Electrical Shock Hazardous Voltage: Disconnect from power source before servicing. Compressor must be grounded. Hot Surface To reduce the risk of injury or damage, avoid contact with any hot surface. Risk to Breathing Air obtained directly from the air compressor should never be used to supply air for human consumption. Pinch Point To reduce the risk of injury or damage, avoid contact with any pinch point.