Ridgid RV2400A Owners Manual - Page 11
Wet/Dry Vac Assembly
View all Ridgid RV2400A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
SP6636 1/10/07 9:52 AM Page 11 Installing Tool Holder 1. Install tool holder as shown with extension wand holders facing unit. Tote Snaps Tote Straps (4) 2. As an alternative storage solution, the tool holder may hang on a wall. Two wall mounting hooks (not provided) must be secured to the wall as shown (sold separately). Handle Grommet Extension Wand Storage Locations Wall Mount Hook Wall Wet/Dry Vac Assembly 1. Position the powerhead assembly on the drum/caddy assembly as shown (assembled earlier). 2. Rotate both latches down and press until you hear them snap over the flanges on the drum. Drum Latch Drum Latch Drum Flange Insert Hose Insert the push button end of the "Tug-ALong" hose into the inlet of the vac. The hose should snap into place. To remove the hose from the vac, press the release button in the hose assembly and pull the hose out of the vac inlet, as shown. On the RV2600B, press the curved metal extension wand into the coupling ring of the hose end. Join the two metal extension wands, aligning the button and hole so they snap together. Attach the accessories, aligning the button and hole so they snap together. Coupling Ring Press and Pull Release Button Powerhead Assembly Latch Drum Metal Extension Wand (Curved) Metal Extension Wand (Straight) Accessory Wet/Dry Vac & Hose Assembly 11