Rocketfish RF-RBREC User Manual (English) - Page 16

Connecting the receiver to an AC power outlet, To connect the receiver

Page 16 highlights

To connect the receiver: 1 Connect the right speaker to the right speaker-out connectors on the wireless receiver. Use a red speaker wire to connect the red (+) speaker-out connector and a black speaker wire to connect the black (-) speaker-out connector. 2 Repeat Step 1 to connect the left speaker. Right (rear) speaker Left (rear) speaker Receiver back AC IN SPEAKER-OUT (4-8 Ohm) R L Note: Make sure the exposed tips of the speaker wires do not touch each other and that they are fully inserted into the gaps. Connecting the receiver to an AC power outlet Caution: Connect the AC power plug to an AC power outlet only after all speakers are connected to the receiver. To connect the receiver to an AC power outlet: 1 Connect one end of the AC power cord to the AC IN connector on the back of the receiver. 2 Plug the other end of the AC power cable into a power outlet. The standby indicator on the receiver turns on. Cautions: To avoid risk of fire and to prevent damage: - Do not use AC adapters other than the supplied AC adapter. - Do not use the supplied AC adapter for other equipment. Tips: - Slide the cable spool (provided) into the slots on the back of the receiver from the top down. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31

16
To connect the receiver:
1
Connect the right speaker to the right speaker-out connectors on the
wireless receiver. Use a red speaker wire to connect the
red
(+)
speaker-out connector and a black speaker wire to connect the
black
(-)
speaker-out connector.
2
Repeat Step 1 to connect the left speaker.
Note
:
Make sure the exposed tips of the speaker wires do not touch each other and
that they are fully inserted into the gaps.
Connecting the receiver to an AC power outlet
Caution
:
Connect the AC power plug to an AC power outlet only after all speakers are
connected to the receiver.
To connect the receiver to an AC power outlet:
1
Connect one end of the AC power cord to the
AC IN
connector on the
back of the receiver.
2
Plug the other end of the AC power cable into a power outlet. The
standby indicator on the receiver turns on.
Cautions
:
To avoid risk of fire and to prevent damage:
- Do not use AC adapters other than the supplied AC adapter.
- Do not use the supplied AC adapter for other equipment.
Tips
:
- Slide the cable spool (provided) into the slots on the back of the receiver from the
top down.
SPEAKER-OUT (4-8 Ohm)
R
L
AC IN
Right (rear)
speaker
Left (rear)
speaker
Receiver back