Rocketfish RF-RBREC User Manual (English) - Page 17

- Before connecting to the AC power outlet, wrap the excessive cable around the spool. Cable notch To AC power outlet Using your wireless receiver Turning the receiver on and off To turn the receiver on and off: 1 To turn off the device, press . The power indicator turns off and the standby indicator turns red. 2 If the receiver is off, press to turn it on. The power indicator lights. Establishing communication Rocketboost products form an audio network and each Rocketboost receiver can select the audio from any Rocketboost sender in the network. Important Every Rocketboost network must contain one hub device, which helps devices join the network. The network can have only one hub, which you can enable using the hub switch on the back of all Rocketboost senders and sender/receivers. The RF-RBREC is a receiver and is not a hub device. To add this receiver to your Rocketboost network, you need to join it to your hub device. Important: Hub devices must always have power for your network to operate. The hub device can be in standby (power saving) mode, but must stay plugged in. RF-RBREC 17