Ryobi A25RT03 Operation Manual - Page 6
Features - table
View all Ryobi A25RT03 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
FEATURES PRODUCT SPECIFICATIONS Table Dimensions 16 in. x 32 in. x 1 in. Maximum Cutter Diameter 1-15/16 in. Fence Length 28 in. Miter Slot 1/4 in. x 3/4 in. x 32 in. Rating 120 V, 60 Hz, AC only, 15 Amps Net Weight 28 lbs. VACUUM PORT FENCE ASSEMBLY BIT GUARD INSERT PLATE 3 2 1 0 1 Inch STARTING PIN FEATHER BOARD inch 3 2 1 0 1 Inch 1 Inch FEDEIDRECTION RESE T PUSH THROAT PLATES SWITCH ASSEMBLY MITER GAUGE RESET BUTTON Fig. 2 KNOW YOUR ROUTER TABLE See Figure 2. The safe use of this product requires an understanding of the information on the product and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. BIT GUARD The articulating router cutter bit guard on the fence assembly provides a barrier to protect the operator from contact with the cutter and is designed to stay in contact with the workpiece. FEATHERBOARD The featherboard allows for safe movement of the workpiece through the cutter area and is height adjustable. FENCE ASSEMBLY The sacrifical MDF fence assembly provides an adjustable surface to support and guide the work. Molded into the fence assembly is the vacuum port. INSERT PLATE The insert plate can be used in combination with a variety of routers. It also has pre-drilled countersunk holes that can be used with a variety of routers. MITER GAUGE A miter gauge is used for mitered routing and to help support wider pieces. RESET BUTTON The router table switch is equipped with a reset button that protects the electronic components of the router table switch box from overload. STARTING PIN When you are unable to use the fence for a guide because the workpiece is odd-shaped or too small, use the starting pin for a guide and/or pivot point. Only use piloted cutters when using the starting pin. 6 - English