Ryobi AG403G Trilingual (AG453) - Page 8

FEATURES PRODUCT SPECIFICATIONS Wheel Size 4-1/2 in. Arbor Size 5/8 in. x 11 UNC No Load Speed 11,000 r/min. (RPM) Input 120 V, AC only, 60 Hz, 6.5 Amps ASSEMBLY UNPACKING This product requires assembly. n Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. WARNING: Do not use this product if any parts on the Packing List are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury. n Inspect the tool carefully to make sure no breakage or damage occurred during shipping. n Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. n If any parts are damaged or missing, please call 1-800-525-2579 for assistance. PACKING LIST Angle Grinder Wrench Disc Flange Flange Nut Side Handle Grinding Wheel Operator's Manual WARNING: If any parts are damaged or missing do not operate this tool until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING: Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury. INSTALLING/REPLACING GRINDING WHEEL See Figure 1, page 12. DANGER: Use ONLY Type 27 depressed center wheels (such as the one provided with this product). NEVER ­attach a Type 1 straight or cut-off wheel to this angle grinder. This product is only designed for grinding and sanding. Use for any other purpose is not recommended and creates a hazard, which will result in serious injury. TYPE 27 − OK TO USE TYPE 1 − DO NOT USE DANGER: Never attach a wood cutting or carving blade of any type to this angle grinder. It is only designed for grinding and sanding. Use for any other purpose is not recommended and creates a hazard, which will result in serious injury. WARNING: Thoroughly inspect a new grinding wheel before you install it on the grinder. • Tap lightly around the wheel using a wooden hammer. • Listen carefully to the resulting sounds. Places with fissures or cracks will result in a different sound. Do not use a wheel containing fissures or cracks. When you install a new grinding wheel, carry out a no load revolution test of approximately one minute with the grinding wheel facing a safe direction, i.e., away from people or objects. 8 - English