Ryobi P610 English Manual - Page 18

Replacing The Belt

Get Ryobi P610 PDF manuals and user guides View all Ryobi P610 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

MAINTENANCE REPLACING THE BELT See Figures 17 - 18. When replacing the belt, use recommended replacement belt only (Part No. 570279002).  Remove the battery pack from the tool.  Remove the belt cover screws.  Remove the belt cover.  Force the old belt from the small pulley by turning in the direction shown. As you turn the belt, pull and work it off the small pulley until it has been completely removed from both pulleys.  Install the new belt over the large pulley. As you turn the belt, push and work it onto the small pulley until it is in place.  Make sure the belt is flush with the edge of both pulleys.  Replace the belt cover.  Install the belt cover screws and tighten securely. NOTE: Do not overtighten the screws. BELT COVER SCREWS Fig. 17 SMALL PULLEY LARGE PULLEY Fig. 18 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
18
MAINTENANCE
REPLACING THE BELT
See Figures 17 - 18.
When replacing the belt, use recommended replacement
belt only (Part No. 570279002).
Remove the battery pack from the tool.
Remove the belt cover screws.
Remove the belt cover.
Force the old belt from the small pulley by turning in the
direction shown. As you turn the belt, pull and work it
off the small pulley until it has been completely removed
from both pulleys.
Install the new belt over the large pulley. As you turn the
belt, push and work it onto the small pulley until it is in
place.
Make sure the belt is flush with the edge of both
pulleys.
Replace the belt cover.
Install the belt cover screws and tighten securely.
NOTE:
Do not overtighten the screws.
Fig. 17
Fig. 18
BELT COVER
LARGE PULLEY
SCREWS
SMALL PULLEY