Ryobi P610 English Manual - Page 9
Assembly - hand planer
View all Ryobi P610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
ASSEMBLY UNPACKING This product has been shipped completely assembled. Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. Inspect the tool carefully to make sure no breakage or damage occurred during shipping. Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. If any parts are damaged or missing, please call 1-800-525-2579 for assistance. PACKING LIST Planer (with blades installed) Reversible Blades (2) Edge Guide/Rabbet Guide Blade Wrench Dust Bag Lanyard (not included in combo) Operator's Manual ATTACHING THE PLANER TO A VACUUM See Figure 3. The chip collection system of the planer has a 1-1/4 in. port for inserting a vacuum hose. Remove the battery pack from the tool. Remove the dust bag. Attach a vacuum hose to the chip exhaust. Connect the vacuum to a power supply. DUST BAG ADAPTOR WARNING: If any parts are damaged or missing do not operate this tool until the parts are replaced. Failure to heed this warning could result in serious personal injury. WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. Fig. 2 WARNING: When the tool is not connected to vacuum, always reinstall the dust bag back onto the tool. Failure to do so could cause dust or foreign objects to be thrown into your face or eyes, which could result in possible serious injury. WARNING: To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts. INSTALLING/REMOVING THE DUST BAG See Figure 2. The dust bag located on the right side of the hand planer provides a dust collection system. Wood particles are drawn up through the base and collect in the dust bag during operation. For more efficient operation, empty the dust bag when half full. To install, slide the dust bag adaptor onto the chip exhaust on the planer. To remove the dust bag, grasp the adaptor and pull the dust bag away from the planer. 9 Fig. 3