Ryobi RTS12 Operation Manual - Page 21
Push Stick Storage
View all Ryobi RTS12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
ASSEMBLY To adjust (horizontally and vertically): Remove the anti-kickback pawls and blade guard assembly. From the back of the saw, loosen the screws holding the mounting bracket. Reposition the riving knife left or right as needed to align the riving knife with the saw blade. Once properly aligned, securely retighten all screws. Check again for squareness and continue to adjust if needed. HORIZONTAL ADJUSTMENT RIVING KNIFE FRAMING SQUARE PUSH STICK STORAGE See Figure 18. Insert the push stick storage screws from the loose parts bag into the holes on the side of the saw table. Use a Phillips head screwdriver to tighten screws securely. Place the slots in the push stick over the screws and slide the push stick toward the back of the saw. PUSH STICK STORAGE SCREW(S) BLADE RIVING KNIFE VERTICAL ADJUSTMENT FRAMING SQUARE PUSH STICK Fig. 18 BLADE Fig. 17 21 - English