Ryobi RY120350 Operation Manual - Page 10

OPERATION WARNING: Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury. WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury. INSTALLING/REMOVING BATTERY PACK See Figures 6 - 7. WARNING: Always remove battery pack from your tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury. To install: n Open the battery cover by releasing the latch and opening the cover. n Insert the battery pack into the product as shown.  Make sure the latches on each side of the battery pack snap into place and the battery pack is secured in the product before beginning operation. n Close the battery cover and fasten the latch to secure the cover. WARNING: Never direct a water stream toward people or pets, or any electrical device. Failure to follow these instructions could result in serious injury, electric shock, or death. NOTICE: Before each use, inspect the entire product for damaged, missing, or loose parts such as screws, nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not operate this product until all missing or damaged parts are replaced. Please contact customer service or an authorized service center for assistance. APPLICATIONS You may use this product for the purpose of cleaning objects like the examples listed below: n Patio furniture, windows, automobiles, boats, or RVs WARNING: Do not use the power cleaner unless the battery cover is fully closed and latched. NEVER allow water to enter the battery compartment. To remove: n Unlock and open the battery cover.  Depress the latches to remove the battery pack. n Close and secure the battery cover. WARNING: Battery tools are always in operating condition. Therefore, switch should always be locked with hands free of the lock-out button when not in use. Remove battery pack when transporting or carrying the tool to avoid accidental starting, which may result in serious injury. For complete charging instructions, see the operator's manuals for your battery pack and charger. 8 - English