Ryobi RY31EP26 Operation Manual - Page 4

WARNING: The telescoping pole will flex as pressure is added or lost. Fully understand how the pole moves when adding or lessening pressure before attempting a cleaning project. If you are not completely comfortable with the movement of the pole under changing pressure conditions, do not use this product. Loss of control of the telescoping pole could result in possible serious personal injury. n Adjust the height of the telescoping pole as needed to fit your project requirements. WARNING: Lengthen the telescoping pole only as much as necessary for the project you are attempting and remain in full control of the telescoping pole at all times. Loss of control of the telescoping pole could result in possible serious personal injury. n Move to the project area, raise the pole and aim toward the area to be cleaned. Squeeze the trigger to begin spraying. n When placing the pole on the ground, make sure to set it on the ground gently to avoid breaking any of the plastic components or accessories. STORAGE It is not necessary to disassemble the product for storage. For compact storage, open the lock levers and collapse the pole sections into each other. Close each lock lever to secure in place. NOTE: Avoid kinking the hose during storage to extend the life of the product. REPLACEMENT PARTS The following replacement parts may be ordered by calling our customer service department at 1-800-860-4050: Shoulder Strap 311001005 Brush End 536962003 Lock Nut 536962002 Quick Connect O-ring (9 x 2.5 mm 570724002 Hose 308792013 U-Clip (qty of 2 678799022 Brush 308073013 TECHTRONIC INDUSTRIES POWER EQUIPMENT P.O. Box 1288 Anderson, SC 29622, USA 1-800-860-4050 n www.ryobitools.com 995000689 3-28-19 (REV:03)