Samsung 240MP User Manual (user Manual) (ver.1.0) (English) - Page 24

Portuguese Italiano Español Deutsch Français English 5_E240MP22p.fm Page 22 Thursday, July 12, 2001 10:26 AM Adjusting Your LCD Monitor * According to our R&D Lab test result, "Channel auto program" usually takes around 5 minutes to scan 125 channels. The scanning can be longer or shorter depending on the number of channels and the video source whether the video source is from cable or air. * Upon completion of "Channel auto program", the result of the channel search is stored in designated internal memory. Each found channel is indexed into that memory and the channel indices are used as a look up table. In other words, when a user changes the channel, the monitor refers to the look up table to find the appropriate channel freqency instead of performing physical frequency scanning which gives a lot slower tuning result. In rare cases, "Channel auto program" may miss a channel due to weak signals or for other reasons. To add a channel, please enter the channel number by using the numeric key pads on the remote controller, then use "Fine Tune" menu in the "TV Setup" menu from OSD. When you finish fine tunning the channel you want to add, select "Save". English 22