Samsung 400UXn-M User Manual (ENGLISH) - Page 117

Specifications MagicInfo Pro - Server Requirement Minimum Recommended CPU RAM P1.8 Ghz 256 M P3.0 Ghz 512 M Ethernet OS Application 100 M / 1 Windows WMP 9 or lat- G XP er 100 M / 1 Windows WMP 9 or lat- G XP er PowerSaver This LCD Display has a built-in power management system called PowerSaver. This system saves energy by switching your LCD Display to low-power mode when it has not been used for a certain amount of time. The LCD Display automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your LCD Display OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your computer. Use the software utility installed on your computer to set up this feature. PowerSaver (When used as a Network monitor) State Normal Operation Power saving mode Power off Power Indicator Power Consumption Green 330 W Green, Blinking Less than1watts EPA/ENERGY 2000 Amber 1 watts PowerSaver (When used as a normal monitor) State Normal Operation Power saving mode Power off Power Indicator Power Consumption Green 270 W Green, Blinking Less than1watts EPA/ENERGY 2000 Amber 1 watts Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjusts the screen as follows. Display Mode IBM, 640 x 350 IBM, 640 x 480 IBM, 720 x 400 MAC, 640 x 480 MAC, 832 x 624 MAC, 1152 x 870 VESA, 640 x 480 Horizontal Frequency (kHz) 31.469 31.469 31.469 35.000 49.726 68.681 37.861 Vertical Frequency (Hz) 70.086 59.940 70.087 66.667 74.551 75.062 72.809 Pixel Clock (MHz) 25.175 25.175 28.322 30.240 57.284 100.000 31.500 Sync Polarity (H/V)