Samsung 700S Owners Instructions - Page 7

Chapter Two: Installation English Connecting Your Monitor to a Computer 1 Turn off your computer and unplug its power cord. 2 Connect the signal cable to the signal port on the back of your monitor. 3 If you are using a Macintosh computer, connect the other end of the signal cable to a Macintosh adapter. (The adapter is not included with your monitor. Contact your dealer for more information.) If you are using an IBM-compatible computer, skip to step 5. 4 Follow the instructions included with your adapter to set the pins on your adapter, if necessary. 5 Connect the signal cable (with the adapter if necessary) to the video port on the back of your computer. This port might be directly attached to your computer, or it might be part of a video board, video card, or graphics card. 6 Connect the power cord for your monitor to the power port on the back of the monitor. 7 Plug the power cords of your computer and your monitor into a nearby outlet. 8 Turn on your computer and monitor. If your monitor displays an image, installation is complete. 5