Samsung CLP-510 User Manual (ENGLISH) - Page 195

Message Status Do this... Jam Inside Printer A paper jam has occurred inside the printer. Open the right cover and remove the jammed paper from the printer, referring to page 7.9. Lever Unlocking Error After installing a transfer belt, the lock levers has not been locked. Push the lock levers on each side away from you, referring to page 6.27. Press Continue Button The printer is waiting for the user's action before printing from the manual feeder. Load a sheet of print material and press the On Line/Continue button. You need to press the button for each page to be printed. Load [Size] In Tray1 Load [Size] In Tray2 Load [Size] In MP The paper size specified in the printer properties does not match the paper you are loading. Load the correct paper in the tray Main Motor Error A problem has occurred in the main motor of the printer. Unplug the power cord and plug it in again. If the problem persists, call for service. Memory Overflow The printer does not have enough memory to print the current job. An error has occurred in the firmware program of the printer. The job automatically clears and the printer returns to Standby Mode. • Expand the memory in your printer. See "Installing Additional Printer Memory" on page D.2. Paper Empty [Size] In Tray1 Paper Empty [Size] In Tray2 Paper Empty [Size] In Mp Paper Empty [Size] In Manual The paper tray has run out of paper. Load paper in the paper tray. See page 3.4. Page Too Complex Too much complicated data was sent to the printer. Simplify the page layout and remove unnecessary graphics from your document. To expand the memory in your printer, see "Installing Additional Printer Memory" on page D.2. Ready [Color]Low Toner The corresponding toner cartridge in your printer is low on toner. 7.28 SOLVING PROBLEMS Redistribute the toner in the corresponding toner cartridge, referring to page 6.5.