Samsung Digimax L85 User Manual - Page 24

Flash ( )/ Left button ■ When the menu is displayed on the LCD monitor, pressing the LEFT button makes the cursor shift to the left tab. ■ When the menu is not displayed on the LCD monitor, the LEFT button operates as the FLASH ( ) button. 6 [Selecting the Auto flash] ● Selecting the flash mode 1. Rotate the MODE DIAL to select a RECORDING mode with the exception of Movie clip and Motion capture modes. 2. Press the Flash button until the desired flash mode indicator displays on the LCD monitor. 3. A flash mode indicator will be displayed on the LCD monitor. Use the correct flash to suit the environment. ● Flash range ISO AUTO Normal WIDE TELE 0.8 - 3.0 0.8 - 2.5 (Unit : m) Macro WIDE TELE 0.2 - 0.8 0.5 - 0.8 Auto macro WIDE TELE 0.2 - 3.0 0.5 - 2.5 INFORMATION ● If you press the shutter button after selecting the Auto, Fill-in, Slow sychro flash, the first flash fires to check the shooting condition (Flash range and Power ratio of flash). Do not move the camera until the second flash fires. ● Using the flash frequently will reduce the life of the battery. ● Under normal operating conditions the charging time for the flash is normally within 5 seconds. If the battery is weak, the charging time will be longer. ● During the continuous shot, AEB, Motion capture mode and movie clip mode, the flash function will not operate. ● Take photographs within the flash range. ● The image quality is not guaranteed if the subject is too close or highly reflective. ● When taking an image in poorly lit conditions with the flash, there may be a white speck in the captured image. The speck is caused by the reflecting of the flash light from the atmospheric dust. It is not camera malfuction. 《23》