Samsung Digimax L85 User Manual - Page 39
OSD On Screen Display information, Sharpness
View all Samsung Digimax L85 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Sharpness ■ You can adjust the sharpness of the picture you want to take. You cannot check the sharpness effect on the LCD monitor before you take a picture, because this function is applied only when the captured image is stored on the memory. SHARPNESS Soft Normal Vivid [ PROGRAM mode ] Sub menu Icon Description Soft The edges of the image are softened. This effect is suitable for editing images on your PC. Normal The edges of the image are sharp. This is suitable for printing. The edges of the image are emphasized. The edges Vivid will appear sharp, but noise may occur in the recorded image. OSD (On Screen Display) information ■ In any mode with the exception of VOICE RECORDING mode, you can check the recording status in the LCD monitor. OSD INFORMATION Full Histogram Basic LCD Save ■ Histogram Histogram shows you the distribution of brightness in recorded images. If the bars in the histogram are higher towards the right, the image may be too bright. If the bars are higher on the left, the image may be too dark. If the lighting conditions are too bright to check the subject by using the LCD, checking the histogram will enable more precise exposure control for the shots. Pixel Distribution of brightness Dark Bright ■ Idle mode : If you select the [LCD Save] and the camera isn't operated during the specified time(about 30 SEC.), the camera power will be idle (LCD monitor : OFF, Camera status lamp : Blinking) automatically. To use the camera again, press any of the camera buttons except the power button. If there is no operation during the specified time, the camera power will be turned off automatically to save battery life. Refer to page 60 for more information about the auto power off function. 6 6 《38》 [Full information] [Histogram] [Basic information]