Samsung GX10 User Manual (ENGLISH) - Page 214

Using an External Flash (Optional) About the LCD Panel Display for SEF-36PZF ƈ The SEF-36PZF will automatically convert the field angle differential between 35 mm format and the GX-10 depending on the focal length of the lens you are using (when using D-XENON lenses). The conversion indicator appears and the format size indicator disappears when the exposure metering timer of the GX-10 is on (it returns to 35 mm format display when the exposure metering timer is turned off). Lens focal length 85mm 77mm 50mm 35mm 28mm 24mm 20mm 18mm SEF-36PZF LCD panel Exposure metering timer Off Exposure metering timer On 85mm 58mm 70mm 50mm 48mm 34mm 35mm 24mm 28mm 24mm* 19mm 16mm* * Using wide adaptor Using P-TTL Auto Mode ƈ Use this flash mode with the SEF-36PZF flash unit. When flash mode is set to "P-TTL auto", the flash pre-fires right before taking pictures using 16-segment metering and allows more precise control. P-TTL auto is available in wireless flash mode when two or more SEF-36PZF / SEF-54PZF units are used. 1. Remove the cover of the hot shoe and attach the SEF-36PZF / SEF-54PZF. 2. Turn on the SEF-36PZF / SEF-54PZF. 3. Set the SEF-36PZF / SEF-54PZF flash mode to P-TTL auto. 4. Confirm that the SEF-36PZF / SEF-54PZF is fully charged and then take the picture. INFORMATION ƃ P-TTL auto is only available with the SEF-36PZF / SEF-54PZF flash unit. ƃ The will light in the viewfinder when the flash is ready (fully charged). ƃ For details such as operation method and effective distance, please read the external flash manual. ƃ The flash does not discharge when the subject is bright enough when Flash Mode is or . Therefore, it may not suitable for daylight-sync shooting. ƃ Never press the flash pop up button when any external flash unit is attached to the camera. The built-in flash will hit the external flash. ƃ See the SEF-36PZF / SEF-54PZF operating manual for details. ŝ213Ş