Samsung HLP5085W User Manual (ENGLISH) - Page 90
protective circuit. - replacement lamp
View all Samsung HLP5085W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Appendix • For replacement, you will need a 5.91 Inches-long Phillips screwdriver and a pair of gloves. 1 Unplug TV, then remove the 7 screws. 2 Remove the rear cover. 3 Remove the 2 press-pin screws the Lamp. 4 Separate the Lamp from the engine by holding the handle and pulling it out. 5 To reinstall the Lamp, follow these steps in reverse order. NOTES • Be sure the replacement Lamp is the same type. • After replacing the lamp, align the lamp cover with the groove and secure the screws. • The TV will not turn on if the lamp cover is not correctly closed (as this will activate the protective circuit). English - 90
English - 90
Appendix
• For replacement, you will need a 5.91 Inches-long Phillips screwdriver and a pair of gloves.
NOTES
•
Be sure the replacement Lamp is the same type.
•
After replacing the lamp, align the lamp cover with the groove and secure the screws.
•
The TV will not turn on if the lamp cover is not correctly closed (as this will activate the
protective circuit).
1
Unplug TV, then remove the 7
screws.
2
Remove the rear cover.
3
Remove the 2 press-pin
screws the Lamp.
4
Separate the Lamp from the
engine by holding the handle
and pulling it out.
5
To reinstall the Lamp, follow
these steps in reverse order.