Samsung HLR4266WX Owner Instructions - Page 27
Connecting a Digital Audio System, Connecting to an Analog Amplifier
View all Samsung HLR4266WX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Connecting a Digital Audio System There are many types of digital audio systems on the market today. A simplified illustration of an audio system is shown below. For more information, see your audio system owner's manual. 1 If your audio system has an optical digital audio input, connect to the "DIGITAL AUDIO OUT (OPTICAL)" jack on the TV. TV Rear Panel NOTE • OPTICAL: converts the electric signal into an optical light signal, and transmits it through glass fibers. A transmission system of digital audio in the form of a light wave, S/PDIF format using a glass conductor. See page 77 to set the digital output format (Dolby Digital or PCM) appropriate to your digital audio component. Audio System Connecting to an Analog Amplifier 1 The "AUDIO OUT" terminals cannot be used for external speakers. You must hook them up to an amplifier. When an audio amplifier is connected to the "AUDIO OUT" terminals: Decrease the gain (volume) of the audio amplifier, make the internal mute on and adjust the volume level with the volume control of the amplifier. NOTE • In case the input is HDMI or Component, the audio monitor output signal is available only when Internal Mute is On. (Refer to page 78) TV Rear Panel Amplifier English - 27