Samsung HT-AS601 User Manual (user Manual) (ver.1.0) (English) - Page 22

OPERATION MAIN UNIT 1 Press SETUP button. • "SETUP MODE" appears on the display and enters into Setup Mode. 2 Press INPUT button one time. • "SPEAKER SETUP" appears in the display. 3 Press SURROUND button to select the speaker you want. • Each time you press this button, F.SPK ➝ C.SPK ➝ S.SPK ➝ SB SPK ➝ SW SPK ➝ CROVR will be selected in turn. 4 Press SELECT ( , ) button to set the speaker mode. To Exit Setup Mode • Wait for about 5 seconds or turn the VOLUME CONTROL of the main unit. "SETUP MODE OFF" appears on the display and exits Setup Mode. Setting the Speaker • F.SPK (Front) : LARGE, SMALL • C.SPK (Center) : LARGE, SMALL, NONE • S.SPK (Surround) : LARGE, SMALL, NONE • SB SPK (Surround Back) : LARGE, SMALL, NONE • SW SPK (Subwoofer) : YES, NO • CROVR (Crossover Frequency): 60, 80, 100, 120, 150, 180, 200Hz CROVR(Crossover Frequency) for this unit is 150Hz. • LARGE : Select when you use large speaker. You can listen to full range sound. • SMALL : Select this when you use small speaker. Bass below 100Hz will not be output. • NONE : Select this when you use no speaker. • YES(Subwoofer) : Select this when you use Subwoofer Speaker. • NO(Subwoofer) : Select when you do not use Subwoofer Speaker. • CROVR: Select the crossover frequency for the best bass response in your room. 20