Samsung HT-AS601 User Manual (user Manual) (ver.1.0) (English) - Page 27
To Automatically Output Test Tone
View all Samsung HT-AS601 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Test Tone Use the test tone to check speaker connection status or level. To Automatically Output Test Tone √ MAIN UNIT 1 Press SETUP button. • "SETUP MODE" appears on the display and enters into Setup Mode. 2 Press INPUT button 4 times. • "TEST-T AUTO" appears in the display. 3 Press SURROUND button. • Test signal will be automatically output as follows; F.L ➝ CEN ➝ F.R ➝ S.R ➝ S.B ➝ S.L ➝ S.W . • During test signal output, press SELECT ( , ) button to adjust the speaker output level from -10 to +10 dB by 1 step. To Stop Test Tone Method 1) Press INPUT button 2 times. • "TEST-T OFF" appears on the display and test tone stops. Method 2) Turn VOLUME CONTROL. • "SETUP MODE OFF" appears on the display and test tone stops. 25
25
Test Tone
Use the test tone to check speaker connection status or level.
Press
SETUP
button.
•
“SETUP MODE” appears on the display and enters into Setup Mode.
Press
INPUT
button 4 times.
•
“TEST-T AUTO” appears in the display.
Press
SURROUND
button.
•
Test signal will be automatically output as follows; F.L
CEN
F.R
S.R
S.B
S.L
S.W .
•
During test signal output, press
SELECT
(
) button to adjust the speaker output
level from -10 to +10 dB by 1 step.
√
To Automatically Output Test Tone
MAIN UNIT
1
2
3
To Stop Test Tone
Method 1) Press
INPUT
button 2 times.
•
“TEST-T OFF” appears on the display and test tone stops.
Method 2) Turn
VOLUME CONTROL.
•
“SETUP MODE OFF” appears on the display and test tone stops.
,