Samsung HT-AS601 User Manual (user Manual) (ver.1.0) (English) - Page 52

Symptom Check Remedy There is no sound from surround back speaker • Is the rear center speaker connected properly? • Is the SB SPK selected to NONE in Speaker Setup? • Is Surround Mode set to EX/ES? • Refer to pages 9~10 to connect it properly. • Refer to pages 11~12 to select LARGE or SMALL. • Refer to pages 35~36 to set Surround Mode to EX/ES. Can't select EX/ES Mode. • Is SB SPK selected to NONE in Speaker Setup? • Is the input signal selected properly? Can't select Dolby Pro Logic • Is the input signal selected properly? llx Mode. • Refer to pages 11~12 to select LARGE or SMALL. • Use 5.1 channel external component. • Select 2 channel Dolby Digital, PCM, and Analog input signal. Can't select NEO:6 Mode. • Is the input signal selected properly? • Use PCM and Analog input signal. There is no sound when playing DTS encoded DVD and CD. • Is analog input selected? • Check whether digital external component is properly connected and refer to page 19 to select the digital input. Product Protection Function Heat Protection • Protection function works if the main unit is overheated or power transformer is overheated. " " appears in the display when this function works. - If speaker terminal is shorted - If speaker cord is shorted If there is no problem when you turn it on again after turning it off, PROTECTION mark will disappear on the display and the unit will work properly. • If PROTECTION appears on the display, check whether speaker terminal is shorted and then turn on the device. MISCELLANENOUS 50