Samsung HT-AS720 User Manual (ENGLISH) - Page 18

Anynet+ Using Anynet+(HDMI-CEC) 1 Connect the AV receiver to a Samsung TV with an HDMI cable. (See page 17) 2 Set the Anynet+ function on your TV. (See the TV instruction manual for more information.) • You can operate the AV receiver by using the TV remote control. (Available TV button : VOLUME , button.) MMOOVVEE EENNTTEERR EEXXIITT MOVE ENTER EXIT If you select TV Set the Anynet+(HDMI-CEC) function to on your TV. • Receiver : On : You can listen to audio through the AV Receiver. • Receiver : Off : You can listen to audio through the TV. If you select the DVD Player Select THEATER to connector and set the option of each items below. • View TV : If Anynet+(HDMI-CEC) set to on and you select View TV, the AV receiver will automatically switch to SAT OPTIC2(DIGITAL IN). • Receiver : On : You can listen to audio through the AV receiver. • Receiver : Off : You can listen to audio through the TV. To turn off Anynet+ 1 Press SETUP/MENU button, and then press the ENTER button. • "SETUP MODE" appears on the display and goes into Setup Mode. 2 Press œ √ button to select the "ANYNET+ MODE", and then press the ENTER button. 3 Press the ...† button to set ANYNET+ to OFF. - If you are using Anynet+, set ANYNET+ to ON and if not, set it to OFF. To exit setup mode • Wait for about 5 seconds or press SETUP button. "SETUP OFF" appears on the display and Setup Mode is exited. • When selecting View TV, you must have a digital optical cable connected from the TV to the AV receiver to listen to the TV sound through the AV receiver. Caution • When you are making Anynet+ connection, do not connect more than two AV receivers (Anynet+ installed). Otherwise, it can cause a malfunction. With Anynet+ You can operate this unit, power on your TV, or watch a movie by pressing the Play button on your Samsung TV's remote control. 18