Samsung HT-C550 User Manual (user Manual) (ver.1.0) (English) - Page 30
DRC Dynamic Range Compression, AV-SYNC, HDMI AUDIO, EQ Optimizer, Auto Sound Calibration - front speakers only
UPC - 036725617131
View all Samsung HT-C550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Setup ✎ NOTE ASC setup can be made when there is no disc in the product. You cannot adjust the volume during the ASC setup. If the auto sound microphone is disconnected during the ASC setup, the setup will be canceled. When ASC function is activated, the DSP/EQ, Dolby Pro Logic ll and P. BASS sound effects will not work. If the product is connected to external devices or other components (such as an iPod, AUX, D.IN), the ASC Setup may not work exactly. Auto Sound Calibration You will hear either the ASC mode or the User Speaker Settings. • ON: You will hear sound in the Auto Sound Calibration(ASC) mode. • OFF: You will hear sound in the Speaker Setting value you set. Settings Auto Sound Calibration Auto Sound Calibration : ON ► Auto Sound Calibration Setting Change Select Return Move Select Return Auto Sound Calibration Setting 1. Plug the ASC microphone into the ASC input jack. 2. Place the ASC microphone at the listening position. • Auto Sound Calibration will be automatically set up in the following sequence: 'SPOU-FGU $FOUFS 'SPOU3JHIU 3FBS 3JHIU 3FBS-FGU 4VCXPPGFS • Press the RETURN button to cancel the Auto Sound Calibration Setting. • When the message "REMOVE MIC" appears on the display, unplug the ASC microphone. ✎ NOTE Setting the Auto Sound Calibration function takes about 3 minutes. DRC (Dynamic Range Compression) This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night. • You can select either off, 2/8, 4/8, 6/8, Full. AV-SYNC Video and audio sync may not match with digital TV. If this occurs, adjust the audio delay time to match the video • You can set the audio delay time between 0 mSec and 300 mSec. Set it to the optimal status. HDMI AUDIO The audio signals transmitted over the HDMI Cable can be toggled On/Off. • On : Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only. • Off : Video is transmitted over the HDMI connection cable only, and audio is output through the product speakers only. ✎ NOTE The default setting of this function is HDMI Audio Off. HDMI Audio is automatically down-mixed to 2ch for TV speakers. When HDMI Audio is set to On, PL II /DSP EQ /P.BASS doesn't work. In the iPod mode, this menu is not available. EQ Optimizer 4FUPQUJNBM&2BVUPNBUJDBMMZEFQFOEJOHPO UIFSFHJPO • Off: Turn EQ Optimizer off. • On: 5VSO&20QUJNJ[FSPO 30 English HT-C550-XAA_0607.indd 30 2010-06-07 11:58:36