Samsung HT-P38 Quick Guide (easy Manual) (ver.1.0) (English) - Page 12

Disc Playback 1 Press OPEN/CLOSE button to open the disc tray. 2 Load a disc. • Place a disc gently into the tray with the disc's label facing up. 3 Press DISC SKIP button. • Rotate the carousel tray so you can load the third, fourth, and fifth discs. 4 Close the compartment by pressing the OPEN/CLOSE button again. DVD CD • Playback starts automatically. Note • Depending on the content of the disc, the initial screen may appear different. • Depending on the recording mode, some MP3-CDs cannot be played. • Table of contents of a MP3-CD varies depending on the MP3 track format recorded on the disc. 21 Selecting a Disc in the Disc changer ENG The DVD/CD function is automatically selected when Disc Skip is pushed. To select a specific disc, press the corresponding DIRECT PLAY (1, 2, 3, 4, 5) buttons on the front panel or DISC SKIP on the remote control, until the required disc indicator flashes. • If the disc selected is not loaded, the next disc is played automatically. OPERATION To stop playback, press STOP during playback. • If pressed once, "PRESS PLAY" is displayed and the stop position will be stored in memory. If PLAY/PAUSE ( ) button or ENTER button is pressed, playback resumes from the stop position. (This function works only with DVDs.) • If pressed twice, "STOP" is displayed, and if PLAY/PAUSE ( ) button is pressed, playback starts from the beginning. To temporarily pause playback, press PLAY/PAUSE during playback. • To resume playback, press PLAY/PAUSE ( ) button again. 22