Samsung HW-D650S User Manual (user Manual) (ver.1.0) (English) - Page 39

03 Setup Setting the Test Tone Use the test tone to check the speaker connection status or level. 1. Press the SETUP/MENU button on the remote control. • Each time the button is pressed, the mode switches between INPUT and SETUP OFF. 2. Press the ▲▼ buttons to select SPEAKER, and then press the ENTER button. 3. Press the ▲▼ buttons to select TEST TONE, and then press the ENTER button. 4. Press the ▲▼ buttons to select the option you want, and then press the ENTER button. • AUTO : Test signal will be automatically output as follows; F.L  CEN  S.W  F.R  S.R  S.L. - During test tone output, press the ▲▼ buttons to adjust the speaker output level from -10 to +10 dB by 1 step. • MANUAL : Enables you to adjust the output level of the speaker manually. 1) Press the ENTER button to select the speaker you want. Each time you press the ENTER button, F.L  CEN  S.W  F.R  S.R  S.L will be selected in turn. 2) Press the ▲▼ buttons to set the Test Tone mode you want. You can adjust the speaker output level from -10 to +10dB by 1 step. The sound gets quieter at -10dB and louder at +10dB. ▲FL 0dB ▼ SL 0dB > MOVE   C 0dB USER SW 0dB MANUAL FR 0dB SR 0dB SELECT ' RETURN EXIT - Test Tone Output • F.L (front left) : -10 ~ +10dB • F.R (front right) : -10 ~ +10dB • S L (surround left) : -10 ~ +10dB • S.R (surround right) : -10 ~ +10dB • CEN (center) : -10 ~ +10dB • S.W (subwoofer) : -10 ~ +10dB • SBL (surround back left) : -10 ~ +10dB • SBR (surround back right) : -10 ~ +10dB - To stop test tone - • Press the SETUP/MENU button once. SETUP OFF appears on the display and test tone stops. ✎ NOTE  In the Dolby Pro Logic IIx mode, test signal will be automatically output as follows : F.L  CEN  S.W  F.R  S.R  SBR  SBL  S.L.  In the Dolby Pro Logic IIz mode, test signal will be automatically output as follows : F.L  FHL  CEN  S.W  FHR  F.R  S.R  S.L. 39 English HW-D600_D650S_XAA_0616.indd 39 2011-06-16 10:27:58