Samsung HW-D650S User Manual (user Manual) (ver.1.0) (English) - Page 41
Setting NEO:6 Mode
![]() |
View all Samsung HW-D650S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
03 Setup Setting NEO:6 Mode You can play back 2 channel sound over 5.1 or 7.1 channels when enjoying music or a movie. 1. Press the SETUP/MENU button on the remote control. • Each time the button is pressed, the mode switches between INPUT and SETUP OFF. 2. Press the ▲▼ buttons to select SURROUND, and then press the ENTER button. 3. Press the ▲▼ buttons to select DTS NEO:6, and then press the ENTER button. 4. Press the ENTER buttons to set the C-IMAGE mode you want. Press the ◄ ► buttons to set the C-IMAGE from 0 to 5. This parameter adjusts the center image through the front and center speakers. "5" is the wider. Using NEO:6 Mode Press the NEO:6 button on the remote control. • MUSIC : When listening to music, you can experience sound effects as if you are listening to the actual performance. • CINEMA : Adds realism to the movie soundtrack. • OFF : Output the original signal as it is without applying the sound field effect or any other sound effect. ✎ NOTE NEO:6 works only for 2-ch audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz. Setting EX/ES Mode When surround back speakers are connected, you can listen to 7.1 multi-channel sound using the built-in Dolby Digital Surround EX or DTS ES decoder. This function works when a Dolby Digital or DTS source (such as a DVD player) is input, and does not work with L.PCM and Dolby Digital 2 channel sources. 1. Press the SETUP/MENU button on the remote control. • Each time the button is pressed, the mode switches between INPUT and SETUP OFF. 2. Press the ▲▼ buttons to select SURROUND, and then press the ENTER button. 3. Press the ▲▼ buttons to select EX/ES, and then press the ENTER button. 4. Press the ▲▼ buttons to set the EX/ES mode you want. • AUTO : If the unit receives an audio signal that it can recognize, it will select an optimal decoder for playback in 7.1 channels. If the amplifier does not recognize the audio signal, it will not play in 7.1 channel automatically. • OFF : Dolby Digital Surround EX / DTS ES decoder will not be used for playback. • ON : Dolby Digital or DTS signal will be played in 7.1 channel using Dolby Digital Surround EX / DTS ES decoder. ✎ NOTE You cannot use DTS-ES without surround back speakers connected. 41 English HW-D600_D650S_XAA_0616.indd 41 2011-06-16 10:27:59
![](/manual_guide/products/samsung-hwd600-user-manual-user-manual-ver10-english-b47a59a/41.png)