Home » Samsung Manuals » Computer Monitors » Samsung LD220G » Manual Viewer

Samsung LD220G User Manual (user Manual) (ver.1.0) (English) - Page 36

Adjusting the Monitor, Direct Functions, AUTO(Available in Analog mode only), Brightness

UPC - 729507810751

Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

Adjusting the Monitor Direct Functions Note • The monitor LED displays for 10 seconds • Press the MENU button four times continuously to exit OSD AUTO(Available in Analog mode only) When no OSD is displayed,press" " button to perform the AUTO function, the auto adjustment screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to self-adjust to the incoming Analog signal. If auto adjustment does not work properly, press " " button again to adjust picture with more accuracy. If you change resolution in the control panel, auto function will be executed automatically. Brightness When no OSD is displayed,press" " button to perform the Brightness function. Toggle the Source In power saving mode, the power LED is blinking all the time, or in the Checksignal menu,press" / " buttons to perform the Source function. OSD Function Brightness MagicBright Custom Source Analog Image Size Auto NotePC USB Wide Internet Movie Dynamic Contrast

Section	Page
LCD Monitor	1
Safety Instructions	2
Notational	2
Power	2
Installation	3
Clean	4
Others	5
Introduction	9
{LD190,LD190G}Package Contents	9
Unpacking	9
Your Monitor	10
Initial Settings	10
Front	10
Rear	11
{LD220,LD220G}Package Contents	12
Unpacking	12
Your Monitor	13
Initial Settings	13
Front	14
Rear	14
Connections	17
Monitor connection with D-SUB cable	17
Use a general monitor in the following cases.	17
Monitor connection with USB cable	18
Installation Requirements	18
Use a USB monitor in the following cases.	18
Connecting a USB Monitor	18
When connecting serially	19
When connecting in parallel	19
USB Monitor Driver Installation	19
Multi-monitor Configuration	21
Display Information Setup for USB Monitor	21
Q & A	22
Connecting USB{LD220/LD220G}	24
Using the Stand	26
Folding the base	26
Using the Software	27
Monitor Driver	27
Installing the Monitor Driver (Automatic)	27
Installing the Monitor Driver (Manual)	28
Adjusting the Monitor	36
Direct Functions	36
AUTO(Available in Analog mode only)	36
Brightness	36
Toggle the Source	36
OSD Function	36
Brightness	37
MagicBright	37
Source	38
Image Size	38
Language	38
Exit	39
Troubleshooting	40
Self-Test Feature Check	40
Self-Test Feature Check	40
Warning Messages	40
Environment	40
Useful Tips	41
Check List	41
No images on the screen. I cannot turn on the monitor.	41
The screen shows strange colors or just black and white.	42
The screen suddenly has become unbalanced.	42
The screen is out of focus or OSD cannot be adjusted.	42
LED is blinking but no images on the screen.	42
There are only 16 colors shown on the screen. The screen colors have changed after changing the video card.	43
There is a message that reads \	43
Check the following items if there is trouble with the monitor.	43
Q & A	43
Specifications	45
General	45
PowerSaver	46
Preset Timing Modes	47
General	47
PowerSaver	49
Preset Timing Modes	49
General	50
PowerSaver	52
Preset Timing Modes	52
General	53
PowerSaver	54
Preset Timing Modes	55
Information	56
For Better Display	56
PRODUCT INFORMATION (Image Retention Free)	56
Appendix	60
Contact SAMSUNG WORLDWIDE	60
Terms	62
Correct Disposal	63