Samsung LN-P267W User Manual (user Manual) (ver.1.0) (English) - Page 17
Connecting a VCR, connect two cables.
![]() |
View all Samsung LN-P267W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
BN68-00751A-00ENG.qxd 8/7/04 8:54 PM Page 11 I N S TA L L AT I O N Connecting a VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 7-10). Skip step 1 if you have not yet connected to an antenna or a cable system. 1 Unplug the cable or antenna from the back of the TV. 2 Connect the cable or antenna to the ANTENNA IN terminal on the back of the VCR. 3 Connect an RF cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV. 4 Connect an audio cable between the AUDIO OUT jacks on the VCR and the L-AUDIO-R jacks on the TV. If you have a "mono" (non-stereo) VCR, use the Y-connector (not supplied) to hook up to the left and right audio input jacks of the TV. If your VCR is stereo, you must connect two cables. 5 Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack on the TV. Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape. * Each external input source device has a different back panel configuration. English-11
![](/manual_guide/products/samsung-lnp267w-user-manual-user-manual-ver10-english-065855e/17.png)