Samsung LT-P326W User Manual (user Manual) (ver.1.0) (English) - Page 82
The Anynet System supports only Anynet-enabled devices., set the mode to TV.
View all Samsung LT-P326W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
TROUBLESHOOTING Problem Possible Solution The Anynet does not function. Check to see if the device is an Anynet device. The Anynet System supports only Anynet-enabled devices. The Anynet System supports up to one device from the Receiver product group and two devices from the DVD product group. Check to see if the Anynet devices are plugged in properly. The remote control doesn't work. I would like to start the Anynet. I would like to exit the Anynet. Check to see if the angle and the distance between the remote control and the device are appropriate and if there is any obstacle in the path between the remote control and the device. Replace the remote control batteries. Check to see if you selected the correct device (TV, DVD, VCR, cable or STB) to control using the [Mode] button. Check to see if the remote control mode matches the input mode. See if you pressed the correct function button. Be sure to note that there are buttons on the remote control that are not available depending on the device mode. See if the Anynet devices are connected to the TV according to the connection diagram and make sure the proper Anynet Connection Setting has been selected. Press the [Mode] button on the TV remote control to set the mode to TV. Then, press the [Anynet] button to bring up the Anynet menu and choose a what AV device you want to see. Press [TV/Input] button on the TV remote control. Turn the TV off. I would like to bring up the TV menu while using the Anynet. If you press the [Menu] button while you are using the Anynet Watch function, it can bring up the DVD menu, VCR menu or the Set-Top Box menu. To view the TV menu, go to Anynet "Settings" and select "TV Menu." Press the Menu button on the front of the TV. English-77