Samsung LT-P326W User Manual (user Manual) (ver.1.0) (English) - Page 84

Typical Setup] or [Customized Setup]. The Anynet System

Get Samsung LT-P326W PDF manuals and user guides View all Samsung LT-P326W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 84 highlights

TROUBLESHOOTING Problem Possible Solution See if there are Anynet devices connected. The Anynet System supports only Anynet devices. Check to see if the Anynet devices connected are plugged in properly. Check to see if the Anynet devices are connected properly according to the Anynet connection diagram. (Make sure that the Output port of the TV is connected to the Input port of the Anynet device and the Output port of the Anynet device is connected to the Input port of the other Anynet device.) Connect the video cable of the device to the TV according to the connection diagram. Then go to [Settings] in the Anynet menu and select [Typical Setup] or [Customized Setup]. Check to see if the video cable is damaged. Then go to [Settings] in the Anynet menu and select [Typical Setup] or [Customized Setup]. If the video cables are connected properly, set the input source to the Anynet device (Combo) using the Input button on the remote control and see if the display works properly. If it does not work properly, see Troubleshooting for such device (Combo). Check to see if the device is plugged in properly. Then go to [Settings] in the Anynet menu and select [Typical Setup] or [Customized Setup]. Check to see if the cables are connected properly according to the instructions. Then go to [Settings] in the Anynet menu and select [Typical Setup] or [Customized Setup]. If the device is connected properly, turn the TV off and go to [Settings] in the Anynet menu and select [Basic Connection Setting] or [Customized Setup]. Check to see if two or more of the same type of device are connected and if so, remove all such devices but one. The Anynet System does not function when more than one of the same type of device is connected. Check the number of the Anynet devices connected and connect the devices properly according to the connection diagram. Then go to [Settings] in the Anynet menu and select [Typical Setup] or [Customized Setup]. (The Anynet System supports up to one device from the Receiver product group and two devices from the DVD product group.) English-79

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
English-
79
T
ROUBLESHOOTING
Problem
Possible Solution
See if there are Anynet devices connected.
The Anynet System supports only Anynet devices.
Check to see if the Anynet devices connected are plugged in
properly.
Check to see if the Anynet devices are connected properly
according to the Anynet connection diagram. (Make sure that
the Output port of the TV is connected to the Input port of the
Anynet device and the Output port of the Anynet device is
connected to the Input port of the other Anynet device.)
Connect the video cable of the device to the TV according to the
connection diagram.
Then go to [Settings] in the Anynet menu and select
[Typical Setup] or [Customized Setup].
Check to see if the video cable is damaged. Then go to
[Settings] in the Anynet menu and select [Typical Setup] or
[Customized Setup].
If the video cables are connected properly, set the input source to
the Anynet device (Combo) using the Input button on the remote
control and see if the display works properly. If it does not work
properly, see Troubleshooting for such device (Combo).
Check to see if the device is plugged in properly.
Then go to [Settings] in the Anynet menu and select
[Typical Setup] or [Customized Setup].
Check to see if the cables are connected properly according to
the instructions.
Then go to [Settings] in the Anynet menu and select
[Typical Setup] or [Customized Setup].
If the device is connected properly, turn the TV off and go to
[Settings] in the Anynet menu and select [Basic Connection
Setting] or [Customized Setup].
Check to see if two or more of the same type of device are
connected and if so, remove all such devices but one.
The Anynet System does not function when more than one of
the same type of device is connected.
Check the number of the Anynet devices connected and connect
the devices properly according to the connection diagram.
Then go to [Settings] in the Anynet menu and select
[Typical Setup] or [Customized Setup]. (The Anynet System
supports up to one device from the Receiver
product group and two devices from the DVD product group.)