Samsung LTN1565 User Manual (ENGLISH) - Page 15

06-CHAPTER 2_en 2/25/03 9:22 AM Page 5 I N S TA L L AT I O N Connecting a VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 2.1-2.3). Skip step 1 if you have not yet connected to an antenna or a cable system. 1 Unplug the cable or antenna from the back of the TV. 2 Connect the cable or antenna to the ANTENNA IN terminal on the back of the VCR. 3 Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV. VCR Rear Panel A coaxial cable is usually included with a VCR. (If not, check your local electronics store). 4 Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO jacks on the TV. VCR Rear Panel Coaxial Cable Audio Cable TV Rear Panel Pr Audio(L) Audio(R) TV Rear Panel If you have a "mono" (non-stereo) VCR, use the Y-connector (not supplied) to hook up to the left and right audio input jacks of the TV. If your VCR is stereo, you must connect two cables. 5 Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack on the TV. VCR Rear Panel TV Rear Panel Video Cable Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape. 2.5