Samsung ML-1440 Service Manual - Page 57
Cover Open, No lamp on when the cover is open
View all Samsung ML-1440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Troubleshooting 4-4-6 Cover Open • Description The ERROR lamp is on even when the print cover is closed. Check and Cause 1. The Hook Lever in the top cover may be defective. Solution 1. Replace the hook lever, if defective. 2. Check the connector (Engine B'd↔HVPS) and circuit of the cover switch department in the Main Control board. Perform DCU mode : If Error state '64' occurs, Check the related codes of the Cover Open Error. Hook Lever 2. Check the insertion of the Cover Open S/W Connect. 3. Replace the Main Control board or Cover Open S/W. 4-4-7 No lamp on when the cover is open • Description The ERROR lamp does not come on even when the printer cover is open Check and Cause 1. Check the connector(CN8) and circuit of the cover switch department in the Main Control board. Perform DCU mode : If Error state '64' occurs, Check the related codes of the Cover Open Error Solution 1. Check the insertion of the Cover Open S/W Connect. 2. Replace the Main Control board or Cover Open S/W. Samsung Electronics 4-19