Samsung ML-2855ND-TAA User Guide - Page 50

4. Change the print job properties using the following four tabs displayed at the top of the window. 1. Open the Unified Driver Configurator. If necessary, switch to Printers configuration. 2. Select your machine on the available printers list and click Properties. 3. The Printer Properties window opens. • General: This option allows you to change the paper size, the paper type, and the orientation of the documents. It enables the duplex feature, adds start and end banners, and changes the number of pages per sheet. • Text: This option allows you to specify the page margins and set the text options, such as spacing or columns. • Graphics: This option allows you to set image options that are used when printing images/files, such as color options, image size, or image position. • Advanced: This option allows you to set the print resolution, paper source, and destination. If an option is grayed out, it means that the grayed out option is not supported. 5. Click Apply to apply the changes and close the Properties window. 6. Click OK in the LPR GUI window to start printing. 7. The Printing window appears, allowing you to monitor the status of your print job. To abort the current job, click Cancel. Printing files You can print many different types of files on your machine using the standard CUPS way, directly from the command line interface. The CUPS lpr utility allows you to do that. But the drivers package replaces the standard lpr tool by a much more user-friendly LPR GUI program. To print any document file: 1. Type lpr from the Linux shell command line and press Enter. The LPR GUI window appears. When you type only lpr and press Enter, the Select file(s) to print window appears first. Just select any files you want to print and click Open. 2. In the LPR GUI window, select your machine from the list, and change the print job properties. 3. Click OK to start printing. Configuring Printer Properties Using the Printer Properties window provided by the Printers configuration, you can change the various properties for your machine as a printer. The following five tabs display at the top of the window: • General: This option allows you to change the printer location and name. The name entered in this tab displays on the printer list in Printers configuration. • Connection: This option allows you to view or select another port. If you change the machine port from USB to parallel or vice versa while in use, you must re-configure the machine port in this tab. • Driver: Allows you to view or select another printer driver. By clicking Options, you can set the default device options. • Jobs: This option shows the list of print jobs. Click Cancel job to cancel the selected job and select the Show completed jobs check box to see previous jobs on the job list. • Classes: This option shows the class that your machine is in. Click Add to Class to add your machine to a specific class or click Remove from Class to remove the machine from the selected class. 4. Click OK to apply the changes and close the Printer Properties window. PRINTING WITH PS DRIVER PS printer driver is provided on the supplied software CD. If you select Typical installation for a local printer or Typical installation for a network printer when installing machine's driver, PS driver will automatically be installed. (See "Installing USB connected machine's driver" on page 26 or "Installing network connected machine's driver" on page 32.) After installing the memory module, you need to select it in the printer properties of the PostScript printer driver in order to use it. (See "Activating the added accessories in printer properties" on page 78.) 1. Open the document you want to print. 2. Select Print from the File menu. The Print window appears. It may look slightly different depending on your application. The basic print settings are selected within the Print window. These Printing_ 50