Samsung ML-2855ND-TAA User Guide - Page 58

Windows, Printing out the machine’s MAC address, Setting network values, Macintosh, Linux

Get Samsung ML-2855ND-TAA - Monochrome Laser Printer Taa PDF manuals and user guides
UPC - 635753625585
View all Samsung ML-2855ND-TAA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

Windows The following procedure is based on the Windows XP operating system. Installing the program 1. Insert the software CD provided with your machine. When the software CD runs automatically, close the window. 2. From the Start menu select My Computer and open the X drive. ( X represents your CD-ROM drive.) 3. Double click Application > SetIP. 4. Double-click Setup.exe to install this program. 5. Click OK. If necessary, select a language from the drop-down list.. 6. Follow the instructions in the window to complete the installation. Printing out the machine's MAC address 1. Make sure that the machine is turned on with paper loaded in the tray. 2. Press until Network appears on the bottom line of the display and press OK. 3. Press the left/right arrow until Network Info. appears and press OK. 4. Press the left/right arrow until Print? appears. 5. Press Yes. Setting network values 1. Print the machine's network configuration report to find your machine's MAC address. 2. From the Windows Start menu, select All Programs > Samsung Network Printer Utilities > SetIP > SetIP. 3. Click to open the TCP/IP configuration window. 4. Enter the network card's MAC address, IP address, subnet mask, default gateway, and then click Apply. When you enter the MAC address, enter it without a colon(:). 5. The machine prints the network information. Confirm all the settings are correct. 6. Close the SetIP program. Macintosh SetIP program should be automatically installed during the printer driver installation. Printing out the machine's MAC address 1. Make sure that the machine is turned on with paper loaded in the tray. 2. Press until Network appears on the bottom line of the display and press OK. 3. Press the left/right arrow until Network Info. appears and press OK. 4. Press the left/right arrow until Print? appears. 5. Press Yes. Setting network values If you want to change your network printer IP setting, follow the below instruction. If you select Typical installation for a network printer during the printer driver installation, the SetIP program automatically runs after the installation. Go to step 4. 1. Print the machine's network configuration report to find your machine's MAC address. 2. Open the Library folder > Printers > Samsung > your printer model name > SetIP. 3. Double click the SetIPApplet.html file. 4. The certificate window appears, click Trust. 5. Click to open the TCP/IP configuration window. 6. Enter the network card's MAC address, IP address, subnet mask, default gateway, and then click Apply. When you enter the MAC address, enter it without a colon(:). 7. The machine prints the network information. Confirm all the settings are correct. 8. Close the SetIP program. Linux SetIP program should be automatically installed during the printer driver installation. Printing out the machine's MAC address 1. Make sure that the machine is turned on with paper loaded in the tray. 2. Press until Network appears on the bottom line of the display and press OK. 3. Press the left/right arrow until Network Info. appears and press OK. 4. Press the left/right arrow until Print? appears. 5. Press Yes. Setting network values 1. Print the machine's network configuration report to find your machine's MAC address. 2. Open the /opt/Samsung/mfp/share/utils/. 3. Double click the SetIPApplet.html file. 4. Click to open the TCP/IP configuration window. 5. Enter the network card's MAC address, IP address, subnet mask, default gateway, and then click Apply. When you enter the MAC address, enter it without a colon(:). 6. The machine prints the network information. Confirm all the settings are correct. 7. Close the SetIP program. USING THE UNIFIED LINUX DRIVER CONFIGURATOR The supplied software CD provides you with the Unified Linux Driver package for using your machine with a Linux computer. Unified Linux Driver Configurator is a tool primarily intended for configuring machine devices. After the driver is installed on your Linux system, the Unified Linux Driver Configurator icon will automatically be created on your desktop. Opening the Unified Driver Configurator 1. Double-click the Unified Driver Configurator on the desktop. You can also click the Startup Menu icon and select Samsung Unified Driver > Unified Driver Configurator. Management tools_ 58

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
Management tools
_ 58
Windows
The following procedure is based on the Windows XP operating system.
Installing the program
1.
Insert the software CD provided with your machine. When the
software CD runs automatically, close the window.
2.
From the
Start
menu select
My Computer
and open the X drive. ( X
represents your CD-ROM drive.)
3.
Double click
Application
>
SetIP
.
4.
Double-click
Setup.exe
to install this program.
5.
Click
OK
.
If necessary, select a language from the drop-down list..
6.
Follow the instructions in the window to complete the installation.
Printing out the machine’s MAC address
1.
Make sure that the machine is turned on with paper loaded in the tray.
2.
Press
until
Network
appears on the bottom line of the display and
press
OK
.
3.
Press the left/right arrow until
Network Info.
appears and press
OK
.
4.
Press the left/right arrow until
Print?
appears.
5.
Press
Yes
.
Setting network values
1.
Print the machine’s network configuration report to find your machine’s
MAC address.
2.
From the Windows
Start
menu, select
All Programs
>
Samsung
Network Printer Utilities
>
SetIP
>
SetIP
.
3.
Click to open the TCP/IP configuration window.
4.
Enter the network card’s MAC address, IP address, subnet mask,
default gateway, and then click
Apply
.
When you enter the MAC address, enter it without a colon(:).
5.
The machine prints the network information. Confirm all the settings are
correct.
6.
Close the SetIP program.
Macintosh
SetIP program should be automatically installed during the printer driver
installation.
Printing out the machine’s MAC address
1.
Make sure that the machine is turned on with paper loaded in the
tray.
2.
Press
until
Network
appears on the bottom line of the display
and press
OK
.
3.
Press the left/right arrow until
Network Info.
appears and press
OK
.
4.
Press the left/right arrow until
Print?
appears.
5.
Press
Yes
.
Setting network values
If you want to change your network printer IP setting, follow the below
instruction.
If you select
Typical installation for a network printer
during the
printer driver installation, the SetIP program automatically runs
after the installation. Go to step 4.
1.
Print the machine’s network configuration report to find your
machine’s MAC address.
2.
Open the
Library
folder >
Printers
>
Samsung
>
your printer
model name
>
SetIP
.
3.
Double click the
SetIPApplet.html
file.
4.
The certificate window appears, click
Trust
.
5.
Click to open the TCP/IP configuration window.
6.
Enter the network card’s MAC address, IP address, subnet mask,
default gateway, and then click
Apply
.
When you enter the MAC address, enter it without a colon(:).
7.
The machine prints the network information. Confirm all the settings
are correct.
8.
Close the SetIP program.
Linux
SetIP program should be automatically installed during the printer driver
installation.
Printing out the machine’s MAC address
1.
Make sure that the machine is turned on with paper loaded in the
tray.
2.
Press
until
Network
appears on the bottom line of the display
and press
OK
.
3.
Press the left/right arrow until
Network Info.
appears and press
OK
.
4.
Press the left/right arrow until
Print?
appears.
5.
Press
Yes
.
Setting network values
1.
Print the machine’s network configuration report to find your
machine’s MAC address.
2.
Open the /
opt
/
Samsung
/
mfp
/
share
/
utils
/.
3.
Double click the
SetIPApplet.html
file.
4.
Click to open the TCP/IP configuration window.
5.
Enter the network card’s MAC address, IP address, subnet mask,
default gateway, and then click
Apply
.
When you enter the MAC address, enter it without a colon(:).
6.
The machine prints the network information. Confirm all the settings
are correct.
7.
Close the SetIP program.
USING THE UNIFIED LINUX DRIVER
CONFIGURATOR
The supplied software CD provides you with the Unified Linux Driver
package for using your machine with a Linux computer.
Unified Linux Driver Configurator is a tool primarily intended for configuring
machine devices.
After the driver is installed on your Linux system, the Unified Linux Driver
Configurator icon will automatically be created on your desktop
.
Opening the Unified Driver Configurator
1.
Double-click the
Unified Driver Configurator
on the desktop.
You can also click the
Startup
Menu icon and select
Samsung Unified
Driver
>
Unified Driver Configurator
.