Samsung NP305V5AI Interactive Guide Ver.1.1 (English) - Page 64
Using the WOL Wake On LAN function
View all Samsung NP305V5AI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Wired Network Using the WOL (Wake On LAN) function is a function that activates the system from Sleep mode when a signal (such as a ping or magic packet command) arrives over the network (wired LAN). 1 ► For Windows 7 Click Start > Control Panel > Network and Internet > Network and Sharing Center and click on Change adapter settings in the left menu pane. ► For Windows XP Click Start > Control Panel > Network and Internet Connections > Network Connection. 2 Right-click on the Local Area Connection and select Properties. 3 Click Configure > Power Management tab. Select Allow this device to bring the computer out of standby, then click OK. Restart the system. - If the system wakes up from Sleep mode even though there is no received signal, use the system after disabling the function. - The LAN LED may not be turned off if System is shoutdown without disabling the WOL (Wake on LAN) option. Chapter 2. Using the computer 63 - Connecting a wired LAN while using a wireless LAN may not activate the function. Set the Wireless LAN to Disable to use the function. - feature may not work while using Hybrid power saving feature. For Win7, Wake On LAN is not supported by Ping. When connected to a 100Mbps/1Gbps wired LAN and the computer exits Sleep/hibernation mode, a message appears informing you of a connection to a 10Mbps/100Mbps wired LAN. This happens because when the computer exits standby/hibernate mode, restoring the network takes about 3 seconds. When the network is restored, it operates at 100Mbps/1Gbps. When system is running on battery, some time it takes about 20sec after inserting LAN cable to be able to connect to internet. This symptom happen as a result of power saving feature to reduce battery consumption. When system is running on battery, the Wired LAN speed is decreased automatically to reduce battery consumption. In such case, a 1Gbps /100Mbps LAN would function at 100Mbps/10Mbps speed.