Samsung NX60A6711SS/AA Installation Guide - Page 13

IMPORTANT, A: Cabinet opening, English 13, Exception 1

Get Samsung NX60A6711SS/AA PDF manuals and user guides View all Samsung NX60A6711SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

Minimum dimensions WARNING If overhead cabinets are provided, a range hood should also be provided that projects horizontally a minimum of 5 in (12.7 cm) beyond the front of the cabinets. This will dissipate any heat buildup in the overhead cabinets to prevent death, personal injury, and/or fire hazard. The ventilating hood must be constructed of sheet metal not less than 0.0122" thick. Install above the cooktop with a clearance of not less than 1/4" between the hood and the underside of the combustible material or metal cabinet. The hood must be at least as wide as the appliance and centered over the appliance. Clearance between the cooking surface and the ventilation hood surface must never be less than 24 inches. Exception 1 : Installation of a listed microwave oven or cooking appliance over the cooktop shall conform to the installations packed with that appliance. • 30-in (76.2-cm) minimum clearance between the top of the cooking surface and the bottom of an unprotected wood or metal cabinet; or If no 30-in (76.2- cm) minimum clearance, 24-in (61-cm) minimum when the bottom of the wood or metal cabinet is protected by not less than 0.25-in (0.64-cm) flame-retardant millboard covered with not less than no. 28 MSG sheet steel, 0.015-in (0.038-cm) stainless steel, 0.024-in (0.061-cm) aluminum, or 0.020-in (0.051-cm) copper. • 18-in (45.7-cm) minimum between the countertop and the adjacent cabinet bottom. Exception 2 : For island installation, maintain 2-1/2" minimum from cutout to back edge of countertop and 4" minimum from cutout to side edges of countertop. IMPORTANT: To eliminate the risk of burns or fire caused by reaching over heated surface units, avoid having cabinet storage space located above the surface units. If you have cabinet storage space over the heating elements, you can reduce the risk by installing a range hood that projects horizontally a minimum of 5 inches beyond the bottom of the cabinets. Installation guide 103⁄16" 465/16"471/16" 361/8"367/8" 2915⁄16" 293⁄4" 3" 25" 24" 3" 24" 357⁄8" 6" B 2811⁄16" A 267⁄16" 491⁄4" A: Cabinet opening 30" (76.2) IMPORTANT: If your cabinet counter tops are over 37" high, this range cannot be installed without raising it on a solid board that meets the heat requirements. Range top must be at the same height or higher as the the counter top. Installation requirements Install_NX60A6_DG68-01337A-00_EN+MES+CFR.indb 13 English 13 2020-12-30 10:56:11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
English 13
Installation requirements
Minimum dimensions
WARNING
If overhead cabinets are provided, a range hood should also be provided that
projects horizontally a minimum of 5 in (12.7 cm) beyond the front of the cabinets.
This will dissipate any heat buildup in the overhead cabinets to prevent death,
personal injury, and/or fire hazard. The ventilating hood must be constructed of
sheet metal not less than 0.0122” thick. Install above the cooktop with a clearance
of not less than 1/4” between the hood and the underside of the combustible
material or metal cabinet. The hood must be at least as wide as the appliance
and centered over the appliance. Clearance between the cooking surface and the
ventilation hood surface must never be less than 24 inches.
Exception 1 :
Installation of a listed microwave oven or cooking appliance over the
cooktop shall conform to the installations packed with that appliance.
•
30-in (76.2-cm) minimum clearance between the top of the cooking surface and
the bottom of an unprotected wood or metal cabinet; or If no 30-in (76.2- cm)
minimum clearance, 24-in (61-cm) minimum when the bottom of the wood or
metal cabinet is protected by not less than 0.25-in (0.64-cm) flame-retardant
millboard covered with not less than no. 28 MSG sheet steel, 0.015-in (0.038-cm)
stainless steel, 0.024-in (0.061-cm) aluminum, or 0.020-in (0.051-cm) copper.
•
18-in (45.7-cm) minimum between the countertop and the adjacent cabinet
bottom.
Exception 2 :
For island installation, maintain 2-1/2” minimum from cutout to back
edge of countertop and 4” minimum from cutout to side edges of countertop.
IMPORTANT:
To eliminate the risk of burns or fire caused by reaching over heated surface
units, avoid having cabinet storage space located above the surface units. If you
have cabinet storage space over the heating elements, you can reduce the risk by
installing a range hood that projects horizontally a minimum of 5 inches beyond
the bottom of the cabinets.
Installation guide
A
B
36
36
1
/
8
"±
"±
36
36
7
/
8
"
46
46
5
/
16
16
"±
"±
47
47
1
/
16
16
"
29
29
3
⁄
4
"
10
10
3
⁄
16
16
"
26
26
7
⁄
16
16
"
49
49
1
⁄
4
"
28
28
11
11
⁄
16
16
"
29
29
15
15
⁄
16
16
"
35
35
7
⁄
8
"
25"
25"
24"
24"
6"
6"
3"
3"
24"
24"
3"
3"
A: Cabinet opening
30” (76.2)
IMPORTANT:
If your cabinet counter tops are over 37" high, this range cannot
be installed without raising it on a solid board that meets the heat
requirements. Range top must be at the same height or higher as
the the counter top.
Install_NX60A6_DG68-01337A-00_EN+MES+CFR.indb
13
Install_NX60A6_DG68-01337A-00_EN+MES+CFR.indb
13
2020-12-30
°° 10:56:11
2020-12-30
°° 10:56:11