Samsung NX60A6711SS/AA Installation Guide - Page 21

Step 7. Assemble the surface burners, Step 8. Check the ignition of surface burners, English 21

Get Samsung NX60A6711SS/AA PDF manuals and user guides View all Samsung NX60A6711SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

Step 7. Assemble the surface burners CAUTION Do not operate the surface burners without all burner parts in place. 1. Position surface burner heads on top of the surface burner manifolds as shown at left. The electrodes will fit into the slot in the bottom of the heads. Make sure the surface burner heads are flat and parallel with the cooktop. 2. Place the matching size caps on top of each surface burner head. Precise Simmer Burner (RR) Flat surface Concave line NOTE The caps on Precise simmer burner (RR) and inside Dual Burner (RF) can be interchangeably used. 3. Place the left, center, and right surface burner grates on the cooktop. The edges of the grates should match up with the edges of the cooktop. Step 8. Check the ignition of surface burners Check the operation of all cooktop and oven burners after the range has been installed and assembled, gas supply lines have been carefully checked for leaks, and electrical power cord has been plugged in. All surface and oven burners have electronic ignition. To turn on a surface burner: 1. Push in and turn the control knob for that surface burner to the Lite position. The 2 "clicking" sound indicates the electronic ignition system is operating properly. The burner will light in about 4 seconds, after 1 the air has been purged from the supply line. 2. After the burner lights, turn the control knob to the desired setting. The "clicking" sound will stop and the flame height will change from Max. to Min. during turning the control knob. 3. Repeat steps 1 and 2 to check the operation of each surface burner in succession. Installation instructions Install_NX60A6_DG68-01337A-00_EN+MES+CFR.indb 21 English 21 2020-12-30 10:56:14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
English 21
Installation instructions
Step 7. Assemble the surface burners
CAUTION
Do not operate the surface burners without
all burner parts in place.
1.
Position surface burner heads on top of
the surface burner manifolds as shown at
left. The electrodes will fit into the slot in
the bottom of the heads. Make sure the
surface burner heads are flat and parallel
with the cooktop.
2.
Place the matching size caps on top of
each surface burner head.
Precise Simmer Burner (RR)
Flat surface
Concave line
NOTE
The caps on Precise simmer burner
(RR) and inside Dual Burner (RF) can be
interchangeably used.
3.
Place the left, center, and right surface
burner grates on the cooktop. The edges
of the grates should match up with the
edges of the cooktop.
Step 8. Check the ignition of surface burners
Check the operation of all cooktop and oven burners after the range has been
installed and assembled, gas supply lines have been carefully checked for leaks,
and electrical power cord has been plugged in.
All surface and oven burners have electronic ignition.
2
1
To turn on a surface burner:
1.
Push in and turn the control knob for that
surface burner to the Lite position. The
“clicking” sound indicates the electronic
ignition system is operating properly. The
burner will light in about 4 seconds, after
the air has been purged from the supply
line.
2.
After the burner lights, turn the control
knob to the desired setting. The “clicking”
sound will stop and the flame height will
change from Max. to Min. during turning
the control knob.
3.
Repeat steps 1 and 2 to check the
operation of each surface burner in
succession.
Install_NX60A6_DG68-01337A-00_EN+MES+CFR.indb
21
Install_NX60A6_DG68-01337A-00_EN+MES+CFR.indb
21
2020-12-30
°° 10:56:14
2020-12-30
°° 10:56:14