Samsung NX60T8711SS/AA Installation Guide - Page 14

IMPORTANT, A: Cabinet opening, English, Exception 1

Get Samsung NX60T8711SS/AA PDF manuals and user guides View all Samsung NX60T8711SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

Installation requirements Minimum dimensions WARNING If overhead cabinets are provided, a range hood should also be provided that projects horizontally a minimum of 5 in (12.7 cm) beyond the front of the cabinets. This will dissipate any heat buildup in the overhead cabinets to prevent death, personal injury, and/or fire hazard. The ventilating hood must be constructed of sheet metal not less than 0.0122" thick. Install above the cooktop with a clearance of not less than 1/4" between the hood and the underside of the combustible material or metal cabinet. The hood must be at least as wide as the appliance and centered over the appliance. Clearance between the cooking surface and the ventilation hood surface must never be less than 24 inches. Exception 1 : Installation of a listed microwave oven or cooking appliance over the cooktop shall conform to the installations packed with that appliance. • 30-in (76.2-cm) minimum clearance between the top of the cooking surface and the bottom of an unprotected wood or metal cabinet; or If no 30-in (76.2- cm) minimum clearance, 24-in (61-cm) minimum when the bottom of the wood or metal cabinet is protected by not less than 0.25-in (0.64-cm) flame-retardant millboard covered with not less than no. 28 MSG sheet steel, 0.015-in (0.038-cm) stainless steel, 0.024-in (0.061-cm) aluminum, or 0.020-in (0.051-cm) copper. • 18-in (45.7-cm) minimum between the countertop and the adjacent cabinet bottom. Exception 2 : For island installation, maintain 2-1/2" minimum from cutout to back edge of countertop and 4" minimum from cutout to side edges of countertop. IMPORTANT: To eliminate the risk of burns or fire caused by reaching over heated surface units, avoid having cabinet storage space located above the surface units. If you have cabinet storage space over the heating elements, you can reduce the risk by installing a range hood that projects horizontally a minimum of 5 inches beyond the bottom of the cabinets. Installation guide 361/4"-37" 2915⁄16" 293⁄4" 3" 24" 25" 3" 24" 357⁄8" 6" B 2811⁄16" A 267⁄16" 491⁄4" A: Cabinet opening 30" (76.2) IMPORTANT: If your cabinet have height over 37", this range cannot be installed without supporting unit like hard block. Installation requirements 14 English Install_NX60T9700_BEST_BETTER_AA_DG68-01243A-00_EN.indd 14 2020-03-26 6:41:22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
14 English
Installation requirements
Installation requirements
Minimum dimensions
WARNING
If overhead cabinets are provided, a range hood should also be provided that
projects horizontally a minimum of 5 in (12.7 cm) beyond the front of the cabinets.
This will dissipate any heat buildup in the overhead cabinets to prevent death,
personal injury, and/or fire hazard. The ventilating hood must be constructed of
sheet metal not less than 0.0122” thick. Install above the cooktop with a clearance
of not less than 1/4” between the hood and the underside of the combustible
material or metal cabinet. The hood must be at least as wide as the appliance
and centered over the appliance. Clearance between the cooking surface and the
ventilation hood surface must never be less than 24 inches.
Exception 1 :
Installation of a listed microwave oven or cooking appliance over the
cooktop shall conform to the installations packed with that appliance.
•
30-in (76.2-cm) minimum clearance between the top of the cooking surface and
the bottom of an unprotected wood or metal cabinet; or If no 30-in (76.2- cm)
minimum clearance, 24-in (61-cm) minimum when the bottom of the wood or
metal cabinet is protected by not less than 0.25-in (0.64-cm) flame-retardant
millboard covered with not less than no. 28 MSG sheet steel, 0.015-in (0.038-cm)
stainless steel, 0.024-in (0.061-cm) aluminum, or 0.020-in (0.051-cm) copper.
•
18-in (45.7-cm) minimum between the countertop and the adjacent cabinet
bottom.
Exception 2 :
For island installation, maintain 2-1/2” minimum from cutout to back
edge of countertop and 4” minimum from cutout to side edges of countertop.
IMPORTANT:
To eliminate the risk of burns or fire caused by reaching over heated surface
units, avoid having cabinet storage space located above the surface units. If you
have cabinet storage space over the heating elements, you can reduce the risk by
installing a range hood that projects horizontally a minimum of 5 inches beyond
the bottom of the cabinets.
Installation guide
A
B
36
1
/
4
"±37"
29
3
⁄
4
"
26
7
⁄
16
"
49
1
⁄
4
"
28
11
⁄
16
"
29
15
⁄
16
"
35
7
⁄
8
"
25"
24"
6"
3"
24"
3"
A: Cabinet opening
30” (76.2)
IMPORTANT:
If your cabinet have height over 37”, this range cannot be installed
without supporting unit like hard block.
Install_NX60T9700_BEST_BETTER_AA_DG68-01243A-00_EN.indd
14
2020-03-26
°° 6:41:22