Samsung P2250 User Manual (user Manual) (ver.1.0) (English) - Page 22

3-2 Standard Signal Mode Table The LCD monitor has one optimal resolution for the best visual quality depending on the screen size due to the inherent characteristics of the panel, unlike for a CDT monitor. Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting the resolution to the optimal resolution of the product. If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on. Therefore, configure it as follows referring to the User Manual of the graphics card. P1950W DISPLAY MODE IBM, 640 x 480 VESA, 800 x 600 VESA, 800 x 600 VESA, 1024 x 768 VESA, 1280 x 800 VESA, 1440 x 900 HORIZONTAL FREQUENCY (KHZ) 31.469 35.156 37.879 48.363 49.702 55.935 VERTICAL FREQUENCY (HZ) 59.940 56.250 60.317 60.004 59.810 59.887 SYNC POLARITY (H/ PIXEL CLOCK (MHZ) V) 25.175 -/- 36.000 +/+ 40.000 +/+ 65.000 -/- 83.500 -/+ 106.500 -/+ P2050 / P2050G DISPLAY MODE IBM, 640 x 480 VESA, 800 x 600 VESA, 800 x 600 VESA, 1024 x 768 VESA, 1280 x 800 VESA, 1280 X 1024 VESA, 1440 x 900 VESA, 1600 x 900 HORIZONTAL FREQUENCY (KHZ) 31.469 35.156 37.879 48.363 49.702 63.981 55.935 60.000 VERTICAL FREQUENCY (HZ) 59.940 56.250 60.317 60.004 59.810 60.020 59.887 60.000 PIXEL CLOCK (MHZ) SYNC POLARITY (H/ V) 25.175 -/- 36.000 +/+ 40.000 +/+ 65.000 -/- 83.500 -/+ 108.000 +/+ 106.500 -/+ 108.000 +/+ P2250 / P2250G / P2350 / P2350G 3-2 Using the product