Samsung RB195BSSB Service Manual - Page 40
Power Compensation Function
View all Samsung RB195BSSB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Temp Control &Operation Functions 11-14) Power Compensation Function It is the initial Sensor Error Display. Hold on the Super Freeze and the Super Cool buttons for 3 seconds and take off the fingers. Then, press the Fridge button. 1) During the normal operation,when the Super Freeze and the Super Cool buttons are pressed for 3 seconds at the same time, the Freezer and the Fridge temp LEDs will blink for 2 seconds at the interval of 0.5 second. 2) At this time, when pressing the Fridge button ("Ding-Dong " goes off)after taking off the fingers from the Super Freeze and the Super Cool buttons,it will be changed to the Load Status Display Mode. 3) The Load Status Display Mode only shows the status of the load operation command from MICOM. MICOM sends out command signals.So,it does not mean the related components are in operation.For example, even though it shows that a load is operating,it is not operating due to the load defect or the PCB relay defect.It can be applied to A/S. 4) The Load Status Display function maintains for 30 seconds and it goes back to the normal operation. - Self Diagnosis Check List LOAD DISPLAY OTHERS R-FAN R-Room second digit "a" Fridge R-DEFROST HEATER R-Room second digit "c" Fridge COMPRESSOR F-Room second digit "a" Freezer F-FAN F-Room second digit "b" Freezer F-DEFROST HEATER F-Room second digit "b" Freezer INITIAL START MODE R-Room second digit "b" Fridge OVERLOAD MODE R-Room second digit "e" Fridge LOW TEMP MODE R-Room second digit "f" Fridge R-LAMP F-Room first digit "b" Freezer F-LAMP F-Room first digit "a" Freezer EXIHIBITION MODE R-Room second digit "g" Fridge 40