Samsung RF23M8070SR/AA User Manual - Page 40
Filter Reset 3 sec, Filter Reset, Energy Saver, Energy Saver, Door Alarm / °F, °C 3 sec, Door Alarm
View all Samsung RF23M8070SR/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Operations 06 Filter Reset (3 sec) Filter Reset After about 6 months (and typically, about 300 gallons (1200 L) of water), the Filter indicator blinks red for several seconds when you open or close the door, reminding you that the filter needs to be replaced. When this happens, replace the filter, and then press and hold Filter Reset for 3 seconds. The filter lifecycle will be reset and the Filter indicator turns off. NOTE • Some regions have relatively large amounts of lime in their water. This can reduce the lifecycle of the filter. In these areas, you will have to replace the water filter more often than specified above. • If water is not dispensing properly, the water filter is most likely clogged. Replace the water filter. 07 Energy Saver Energy Saver Use Energy Saver mode to reduce power consumption. Press Energy Saver to turn on or off Energy Saver mode and the corresponding indicator. By default, Energy Saver mode is enabled. NOTE If condensation or water drops form on or around the doors, turn Energy Saver mode off. 08 Door Alarm / °F °C (3 sec) Door Alarm °F °C If the door is left open for more than 2 minutes, an alarm will sound and the Alarm Indicator will blink. You can toggle the alarm on and off by pressing Door Alarm. The alarm is enabled by factory default. You can also use the Door Alarm button to switch the temperature scale between Celsius and Fahrenheit. To switch the temperature scale, press and hold Door Alarm for 3 seconds to change the current temperature scale. Operations 40 English Untitled-3 40 2020-04-07 PM 3:29:43