Samsung RSG307AARS User Manual (user Manual) (ver.0.2) (English, French, Spani - Page 12

operating the SAMSUNG side-by-side, refrigerator - fridge

Page 12 highlights

operating the SAMSUNG side-by-side refrigerator Using the control panel 1 2 3 10 7 4 5 6 9 8 ( 1 ) Energy Saver Touching this button turns Energy Saver mode on and off. When you turn Energy Saver on, the Energy Saver icon lights up. Turn Energy Saver off, and the icon goes off. The Energy Saver function turns on automatically when power is supplied to the refrigerator. If condensation or water drops appear on the doors, turn the Energy Saver mode off. ( 2 ) Freezer (Hold 3 sec for Power Freeze) Touch this button to set the Freezer temperature. You can set the temperature between 8°F(-13°C) and -10°F(23°C). Touch and hold this button for 3 seconds to decrease the time needed to freeze products in the Freezer. It can be helpful if you need to freeze easily spoiled items quickly or if the temperature in the Freezer has warmed dramatically (For example, if the door was left open). ( 3 ) Alarm / Hold 3 sec for Filter Reset This button serves two purposes: 1) To turn the door open alarm on and off. If the door alarm is set to On, an alarm beeps if any refrigerator door is left open for more than three minutes. The beeping stops when you close the door. The door alarm function is pre-set to On in the factory. You can turn it off by touching and then releasing this button. You can turn it back on in the same fashion. The icon lights up when the function is on. 2) After you replace the water filter, Touch and hold this button for 3 seconds to reset the water filter life indicator. ( 4 ) Lighting/ Hold 3 sec for C↔F Touching the Lighting button turns on the Dispenser LED lamp (under the display) in continuous mode so that it stays on continuously. The button also lights up. If you want the Dispenser lamp to come on only when some one uses the dispenser, press the Lighting button to turn the continuous mode off. Touch and hold this button for 3 seconds to switch the temperature units between °C and °F ( 5 ) Fridge (Hold 3 sec for Power Cool) Touch this button to set the Fridge temperature. You can set the temperature between 34°F(1°C) and 46°F(8°C). Touch and hold the this button for 3 seconds to decrease the time needed to cool products in the Refrigerator. This can be helpful if you need to cool easily spoiled items quickly or if the temperature in the fridge has warmed dramatically (For example, if the door was left open). 12_ operating

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

12_
operating
operating the SAMSUNG side-by-side
refrigerator
USING THE CONTROL PANEL
( 1 )
Energy
Saver
Touching this button turns Energy
Saver mode on and off. When you
turn Energy Saver on, the Energy
Saver icon lights up. Turn Energy
Saver off, and the icon goes off.
The Energy Saver function turns
on automatically when power is
supplied to the refrigerator.
If condensation or water drops
appear on the doors, turn the Energy
Saver mode off.
( 2 )
Freezer
(Hold 3 sec for Power
Freeze)
Touch this button to set the Freezer
temperature.
You can set the temperature
between 8°F(-13°C) and -10°F(-
23°C).
Touch and hold this button for
3 seconds to decrease the time
needed to freeze products in the
Freezer. It can be helpful if you
need to freeze easily spoiled items
quickly or if the temperature in the
Freezer has warmed dramatically (For
example, if the door was left open).
( 3 )
Alarm / Hold
3 sec for
Filter Reset
This button serves two purposes:
1)
To turn the door open alarm on
and off.
If the door alarm is set to On, an
alarm beeps if any refrigerator door is
left open for more than three minutes.
The beeping stops when you close
the door. The door alarm function
is pre-set to On in the factory. You
can turn it off by touching and then
releasing this button. You can turn
it back on in the same fashion. The
icon lights up when the function is
on.
2)
After you replace the water filter,
Touch and hold this button for 3
seconds to reset the water filter
life indicator.
( 4 )
Lighting/
Hold 3 sec
for C
F
Touching the Lighting button turns
on the Dispenser LED lamp (under
the display) in continuous mode so
that it stays on continuously. The
button also lights up. If you want
the Dispenser lamp to come on only
when some one uses the dispenser,
press the Lighting button to turn the
continuous mode off. Touch and hold
this button for 3 seconds to switch
the temperature units between °C
and °F
( 5 )
Fridge
(Hold 3 sec for Power
Cool)
Touch this button to set the Fridge
temperature.
You can set the temperature
between 34°F(1°C) and 46°F(8°C).
Touch and hold the this button for
3 seconds to decrease the time
needed to cool products in the
Refrigerator. This can be helpful if
you need to cool easily spoiled items
quickly or if the temperature in the
fridge has warmed dramatically
(For example, if the door was left
open).
1
4
5
6
8
9
10
2
3
7