Samsung SCC-641 Owners Instructions - Page 7
Initial Setting - protocols
UPC - 836164001306
View all Samsung SCC-641 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ADAPTER CONNECTION SCC-641(P) Adapter BOARD INITIAL SETTING CAMERA ADDRESS SETUP Dip Switch setting is same as the following example: EX) CAMERA ADDR: When it's number 1, set as follows. ON OFF SW500 Setting communication Protocol. Use number 6~8 PIN of SW501 to set communication Protocol. A :SAMSUNG(SSC-1000) Setting BAUD RATE Use number 4 and 5 of SW501 to set BAUD RATE. ON OFF SW501 BAUD RATE 4800 BPS 9600 BPS 19200 BPS 38400 BPS PIN 4 ON OFF ON OFF PIN 5 ON ON OFF OFF Setting HALF or FULL DUPLEX 12 3 4 5 6 ON OFF SW501 7 8 HALF or FULL DUPLEX is communication method with System Controller. Use number 3 PIN of SW 501. " ON " : FULL DUPLEX. " OFF " : HALF DUPLEX. (SSC-1000)
INITIAL SETTING
CAMERA ADDRESS SETUP
Dip Switch setting is same as the following example:
EX) CAMERA ADDR: When it's number 1, set as follows.
Setting communication Protocol.
Use number 6~8 PIN of SW501 to set communication Protocol.
Setting BAUD RATE
Use number 4 and 5 of SW501 to set BAUD RATE.
Setting HALF or FULL DUPLEX
HALF or FULL DUPLEX is communication method with System Controller.
Use number 3 PIN of SW 501.
" ON " : FULL DUPLEX.
" OFF " : HALF DUPLEX.
(SSC-1000)
ON
OFF
SW500
ON
OFF
SW501
BAUD RATE
4800 BPS
9600 BPS
19200 BPS
38400 BPS
PIN 4
ON
OFF
ON
OFF
PIN 5
ON
ON
OFF
OFF
1
2
3
4
5
6
7
8
ON
OFF
SW501
A :SAMSUNG(SSC-1000)
ADAPTER CONNECTION
SCC-641(P) Adapter BOARD