Samsung SCC-C6455 User Manual - Page 15
Baud Rate Setup, Setting RS-422A/RS-485 Termination
View all Samsung SCC-C6455 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
English Baud Rate Setup Use pins #5, #6 of SW603 to set the baud rate. BAUD RATE 4800 BPS 9600 BPS 19200 BPS 38400 BPS The factory default is 9600 BPS. PIN 5 ON OFF ON OFF PIN 6 ON ON OFF OFF Setting RS-422A/RS-485 Termination As it is shown in the structure map, when Controller and RS-422A/RS-485 is connected, it should be terminated according to the Cable feature of impedance on the each end of the transmitting line to transfer the signals in long distance by controlling the reflection of the signals to the lowest. Controller Termination TX+(DATA+) TX-(DATA-) RX+ RX- RX+ RX- RX+ n < 32 RX- RX- Termination SW1-ON RX+ CAM 1 CAM 2 CAM n-1 CAM n Termination : Using numbers 1 and 2 PIN, turn to and it will be terminated. English _15 00885A-NA_SCC-C6455N-ENG.indb 15 2009-08-05 오후 2:43: