Samsung SCC-C6455 User Manual - Page 18
To connect ALARM IN, To connect ALARM OUT, To connect the controller
View all Samsung SCC-C6455 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
installation & connection To connect ALARM IN 1. Connect one end of the external device's signal line to a corresponding ALARM IN port of the monitor. 2. Connect the other end of the signal line to the earth-grounding [GND] port. To connect ALARM OUT 1. Connect one end of the external device's signal line to a corresponding ALARM OUT port of the monitor. 2. Connect the other end of the signal line to the common [COM] port. To connect the controller Connect an external controller or DVR to the camera, with which you can adjust the camera. 1. Connect the Rx+ pin of the camera to the Tx+ pin of the controller. 2. Connect the Rx- pin of the camera to the Tx- pin of the controller. 3. Connect the Tx+ pin of the camera to the Rx+ pin of the controller. 4. Connect the Tx- pin of the camera to the Rx- pin of the controller. Rx Tx 18_ installation & connection 00885A-NA_SCC-C6455N-ENG.indb 18 2009-08-05 오후 2:43: