Samsung SCC-C6455 User Manual - Page 28

setup DAY/NIGHT You can specify a recording mode according to the scene. For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 20) 1. Select - . 2. Select a screen transition mode according to the illumination, and set options as appropriate.  DAY : Fixed to DAY mode, regardless of the scene.  NIGHT : Fixed to NIGHT mode, regardless of the scene. If BURST is set to , the burst signal will be output along with the black-and-white composite video signal. DAY/NIGHT WHITE BAL FOCUS MODE ZOOM SPEED DISPLAY ZOOM DISPLAY P/T DIGITAL ZOOM DETAIL V-SYNC AUTO ONEAF [2] OFF OFF OFF [2] INT  AUTO : According to the luminance, this will switch DAY to NIGHT mode, or vice versa. - BURST : If set to , the burst signal will not be output in NIGHT mode. - DAYNIGHT BRIGHTNESS : Specify the brightness level switching from COLOR to BW filter. Adjusting from HIGH to LOW will cause to switch the filter in a darker screen. AUTO BURST DAYNIGHT BRIGHTNESS DWELL TIME NIGHTDAY BRIGHTNESS DWELL TIME MASK AREA OFF MID 2SEC MID 5SEC 1 2 - DAYNIGHT DWELL TIME : Time required to determine the filter switch. - NIGHTDAY BRIGHTNESS : Specify the brightness level switching from BW to COLOR filter. Adjusting from HIGH to LOW will cause to switch the filter in a darker screen. - NIGHTDAY DWELL TIME : Time required to determine the filter switch. - MASK AREA : If there exists a bright spot light source in a night scene, you can specify the size and position as needed. This will prevent an error in switching filter, or failure to determine the filter switch in a night scene where a bright spot light source exists. Any excessively bright area in a night scene will be MASKed. MASK AREA 28_ setup 00885A-NA_SCC-C6455N-ENG.indb 28 2009-08-05 오후 2:43: