Samsung SCC-C6455 User Manual - Page 43

English  ALARM IN SET : Select the alarm sensor operation between , and .  ALARM OUT SET : Set the alarm out port matched to the alarm input port.  AUTO SET : Sets the pattern and scan action for the corresponding alarm input. When the alarm is generated, the ALARM1 ALARM2 AUTO SET OFF OFF camera moves to the preset position ALARM3 OFF coupled to the corresponding alarm. ALARM4 OFF Presets 1 ~ 8 are coupled with alarms ALARM5 ALARM6 OFF OFF 1 ~ 8 inputs respectively, and the preset ALARM7 OFF 9 is coupled to the motion detection. ALARM8 OFF The camera stops and remains in the MOTION OFF corresponding preset position for the defined , and performs pattern or scan action defined by the . Setting to will discard with the pattern or scan action after moving to the preset position. - PATTERN 1 ~ 3 : Defined pattern action - HALF1 : Patterns 1 and 2 in serial action - HALF2 : Patterns 2 and 3 in serial action - WHOLE : Patterns 1, 2 and 3 in serial action - SCAN 1 ~ 4 : Predefined SCAN action M  The is used as external switching signal if the is set to .  AUX OUT CONTROL : Sets whether to sustain the alarm output despite of the AUX OUT CONTROL alarm generation or to output alarm out OUT1 OFF signal while the coupled alarm is alive. OUT2 OFF When selected , outputs alarm OUT3 OFF only if the alarm is generated. When selected , it always outputs alarm out signal despite of the alarm generation. 00885A-NA_SCC-C6455N-ENG.indb 43 English _43 2009-08-05 오후 2:43: