Samsung SCW71 User Manual (user Manual) (ver.1.0) (English) - Page 34

EASY Mode for Beginners

Page 34 highlights

ENGLISH Advanced Recording EASY Mode (for Beginners) 1 Even a beginner can easily make a recording using the EASY mode. s The EASY mode only operates in CAMERA mode. 1. Set the power switch to CAMERA mode. 2. By pressing the EASY button, all the functions of the camera will be set to off and the recording settings will be set to the following basic mode. s Battery level, recording mode, counter, date/time will be displayed as the camcorder starts to run. s The word "EASY" will appear on the Viewfinder at the same time. However, the Date/Time will only be seen if it has been previously set. 3. Press the START/STOP button to start recording. s Recording will begin using the basic automatic environment settings. 4. Pressing the EASY button again turns the EASY mode off. s The camera will return to the settings that were set prior to the EASY mode being switched on. STBY X:XX:XX EASY JAN.1,2002 Note: The Easy mode settings are stored in the camera (provided a good lithium battery has been installed). 34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66

Advanced Recording
34
ENGLISH
EASY Mode (for Beginners)
Even a beginner can easily make a recording using the EASY mode.
The EASY mode only operates in CAMERA mode.
1.
Set the power switch to CAMERA mode.
2.
By pressing the EASY button, all the functions of the camera
will be set to off and the recording settings will be set to the
following basic mode.
Battery
level, recording mode, counter, date/time
will be displayed as the camcorder starts to run.
The word “EASY” will appear on the Viewfinder
at the same time.
However, the Date/Time will only be seen if it has been previously set.
3.
Press the START/STOP button to start recording.
Recording will begin using the basic automatic environment settings.
4.
Pressing the EASY button again turns the EASY mode off.
The camera will return to the settings that were set prior to
the EASY mode being switched on.
Note:
The Easy mode settings are stored in the camera (provided a good lithium battery has been installed).
STBY
X:XX:XX
EASY
JAN.1,2002